FAG QJ218-XL-N2-MPA ac compressor bearings

Dz:110 mm; N:18mm; B:45.3 mm; S:11.8 mm; L:134 mm; Designation of bearing:US211-32G2; e:28 mm; G:R1/8"; C0:29.2 kN; J:184 mm;

Weight / Kilogram:0.948; Nlim (oil):9,100 rpm; operating temperature range:-40 to 120 ºC; maximum rpm (grease):7800 rpm; outside diameter:100 mm; Inventory:0.0; bore diameter:35 mm; Manufacturer Name:NTN; D:100 mm; precision rating:Class 0;

f0:14; Associated sleeve reference:H208; Characteristic inner ring frequency, BPFI:5.39 Hz; d1:50.3 mm; Fatigue limit load, Cu:0.81 kN; Static load, C0:17.9 kN; Nlim:5,700 rpm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:3.61 Hz; Brand:SNR;

T max.:100 °C; G:M6x1; A1:16 mm; Designation of housing:F209N-; Recommended tightening torque for set screw:8 Nm; e:22 mm; J:105 mm; C0:20.8 kN; s1:24.6 mm; Z:56.3 mm;

rs min:0.3 mm; t:1 mm; Lubrication hole on inner ring:Oui/Yes; Mass:0.0048 kg; Precision class:P0; B:10 mm; Brand:NTN; ras max:0.3 mm; F:12 mm; da min:10 mm;

Expansion Type:Non-Expansion; Bearing Outer Ring Material:Steel; Shaft Attachment (2):Eccentric Collar; Housing Coating:Powder Coat; Bearing Family:Eccentric Collar Bal; Ball Material:Steel; Manufacturing Plant Location:Rogersville, TN; Flinger Type:None; End Cap Groove:No; Grease Type:Unirex N2;

Dz:95 mm; Designation of housing:SP209N-; B:49.2 mm; A:54 mm; H:54 mm; H1:20 mm; J:146 mm; T max.:100 °C; C0:20.8 kN; Designation of bearing:SUC209-28;

Designation of housing:PE204-; G:R1/8"; N1:19 mm; T min.:-20 °C; A1:19 mm; L:130 mm; H1:14.5 mm; L1:40 mm; H2:64 mm; C:12.8 kN;

Designation of bearing:ES211G2T04; Weight:3.17 kg; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; H2:126 mm; L:140 mm; B1:48.4 mm; A:60 mm; L1:40 mm; s1:36.95 mm;

Housing Coating:No Coating; Bearing Family:Setscrew Ball Bearin; Flinger Type:INTERNAL RUBBER LIP; Anti-Rotation Pin:Yes; Housing Type:2 Bolt Pillow Block; Housing Material:Polymer; Retainer Type:Max Life Cage; Expansion Type:Non-Expansion; Bearing Duty:Normal Duty; Bearing Locking Device:Setscrew;

Z:17 mm; A1:24 mm; H:80 mm; G:M6x1; L:140 mm; Designation of bearing:US205-15G2; C:14 kN; S:7.5 mm; J:105 mm; d:23.81 mm;

A1:12.5 mm; G:R1/8"; d1:52 mm; e:20 mm; L:92 mm; C0:15.3 kN; d:35 mm; N:14mm; Weight:1 kg; T max.:100 °C;

Designation of bearing:EX204G2L3; B:34 mm; d1:32.4 mm; Dz:54 mm; T max.:100 °C; B1:43.5 mm; s1:30.5 mm; N:11mm; J:94.5 mm; H1:12.5 mm;

Nlim (grease):16,000 rpm; Brand:NTN; Mass:0.12 kg; Dynamic load, C:13.5 kN; Da max:42 mm; ra max:1 mm; d:17 mm; Min operating temperature, Tmin:-20 °C; Radial clearance class:CN; D:47 mm;

S:18.2 mm; N2:37 mm; T min.:-20 °C; B1:48.3 mm; Designation of open end cover:SCOE206-30; L:113 mm; H2:56 mm; N:22mm; G:M6x1; Weight:1.42 kg;