80 mm x 200 mm x 48 mm CYSD NJ416 cylindrical roller bearings

d:5.9375 in; Cone Part Number:81593; Cage Type:Stamped Steel; Cg - Geometry Factor:0.125; Ab - Cage-Cone Frontface Clearance:0.03 in; C0 - Static Radial Rating:134000 lbf; db - Cone Backface Backing Diameter:6.65 in; B - Cone Width:1.9687 in; Design Units:Imperial; a - Effective Center Location4:-0.

Housing Material:304 Stainless Steel; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Holder Surface Treatment:Not Provided; Number of Bearings:Double; Number of Bearings:Double; Type:Bearings with Housin; Days to Ship:8 Days; RoHS:6; Flange O.D. H(φ):62;

L1:22.5 mm; T max.:100 °C; s1:36.3 mm; A1:27 mm; J:82.6 mm; T min.:-40 °C; A:45 mm; H1:12 mm; B1:51.1 mm; d:36.51 mm;

Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Holder Surface Treatment:Clear Anodize; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] 201; Bearing Retained:No; Flange O.D. H(φ):54; RoHS:6; Flange Shape:Round Type;

Cage Material:Brass; C1(2) - Dynamic Radial Rating (Two-Rows):3680000 N; da - Inner Ring Backing Diameter:327.000 mm; B - Outer Ring Width:176.000 mm; Y1 - ISO Factor5:3.08; r - Outer Ring To Clear Radius2:4.000 mm; Cage Type:EMB; Design Unit:METRIC; B - Inner Ring Width:176 mm; Y0 - ISO Factor4:2.0

D:82.000 mm; G1 - Heat Generation Factor (Roller-Raceway):34; K - Factor2:1.38; C - Cup Width:17.000 mm; Y - ISO Factor4:1.42; Da - Cup Frontface Backing Diameter:77.00 mm; G2 - Heat Generation Factor (Rib-Roller End):20.3; Series:32010X; Cup Part Number:YKB-32010X; Db - Cup Backface Backing Diamete

Designation of bearing:ES205G2T20; Designation of housing:PA205N-; B1:30.9 mm; G:M6x1; L1:27 mm; H1:12 mm; B:21.4 mm; Designation of open end cover:SCOE205-25; J:56 mm; T max.:200 °C;

Contact Angle:15 º; R - Inner Ring To Clear Radius2:1.0 mm; Ball Type:Ceramic; r - Outer Ring To Clear Radius3:1.0 mm; Full Timken Part Number:2MMC9324WICRDUH; do - Ball Diameter:11.906250 mm; D:165 mm; C0 - Static Radial Rating:59500 N; Precision Class:ISO P4S (ABEC 7/9); Cage Type:CR - Phenolic Ou

Housing Material:304 Stainless Steel; Height H(mm):20 ～ 30; Bearing Retained:Yes (with retaining; Shape:Front Mount; Width T(mm):15; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; RoHS:6; Bearing Retained:Yes (with retaining; Number of Bearings:Single;

A1:12 mm; G:M6x1; S:6.5 mm; B:19.1 mm; Designation of housing:FA203N-; L1:54 mm; A2:37.1 mm; T max.:100 °C; Designation of bearing:ES203G2; C:9.55 kN;

T min.:-40 °C; Dz:54 mm; H2:64 mm; s1:30.5 mm; B:34 mm; Designation of open end cover:SCOE204-12; H:33.3 mm; d1:32.4 mm; C0:6.65 kN; A1:20 mm;

Recommended tightening torque for set screw:8 Nm; C0:15.2 kN; H:98 mm; d:31.75 mm; B:42.9 mm; Designation of open end cover:SCOU207-20; A:21 mm; s1:21.45 mm; SW:3.97 mm; T max.:100 °C;

J:38 mm; C:9.55 kN; N:M6; E:15 mm; B:22 mm; T max.:100 °C; S:6 mm; A1:13 mm; H2:57 mm; s1:11 mm;

H1:19 mm; Designation of housing:PH208N-; C:29.6 kN; C0:18.2 kN; N:17mm; d:38.1 mm; H:100 mm; Designation of bearing:US208-24G2; L1:58 mm; L:184 mm;

Precision:Grade 0; Load Direction:Radial; Bearing Style:Double Shielded; Size Standards:Metric System; Retainer Type:Punching; Type:Ball; Days to Ship:Quote; Outer Ring Shape:Flat; Types:16**/6*** series; Rolling Element Material:Steel;